Directory of image this file is from
This file as a plain text file

/SAMPLE MARKER			             	21-MAY-90
/
/
/
/
/ LOAD DATA IN THE SAMPLE MARKER QUEUE
/
/
/
/
/ FIRE THE SAMPLE MARKER
/
/
/	THIS TASK IS CALL DURING EACH CHOP WHEN A
/	SAMPLE SHEET WOULD BE IN PLACE FOR MARKING.
/	IF THE CURRENT SHEET IS NOT A SAMPLE, WE
/	JUST EXIT.  IF IT IS A SAMPLE, THE DATA FOR
/	THE SAMPLE IS TAKEN OUT OF THE BUFFER, LOADED
/	IN THE SAMPLE MARKER, AND THE SAMPLE MARKER IS 
/	FIRED.
/
/



	TASK=	SMARKQ
	CUR=	MARKFLD
	INIWT=	0
	VERS=	3



	TASK2=	SMARKR
	CUR2=	MARKFLD
	INIWT2=	0
	VERS2=	1







	FIELD MARKFLD%10
	*MARKLOC
/
/
/ PUT SAMPLE DATA IN THE SAMPLE MARKER QUEUE
/
/
/	COME HERE (FROM TALLEY) FOR EACH SAMPLE AND ADD
/	THE INFORMATION FOR THAT SAMPLE INTO THE SAMPLE
/	MARKER QUEUE.
/
/
START,	CLB 
	CAL
	SUSPND		/GO TO SLEEP 'TIL NEEDED.

	CLB
	TAD IQAVL	/SET UP AN INDEX FOR THE DATA.
	DCA XR16

	CDF 20
	TAD I (SAMNAD)	/GET THE ADDRESS OF THE SAMPLE
	CDF CUR		/ NUMBER TO USE
	DCA SMQWKA

	TAD I SMQWKA	/MOVE THE PROPER SAMPLE NUMBER.
	ISZ SMQWKA
	DCA I XR16
	TAD I SMQWKA
	ISZ SMQWKA
	DCA I XR16
	TAD I SMQWKA
	DCA I XR16

	TAD I (CRTD07)	/AND THE SHIFT ROLL NUMBER
	DCA I XR16
	TAD I (CRTD07+1)
	DCA I XR16

	CDF 20
	TAD I (SAMTYP)	/AND FINALLY THE SAMPLE TYPE
	CDF CUR
	DCA I XR16

	TAD XR16	/UPDATE THE BUFFER POINTER STORAGE
	DCA IQAVL

	TAD IQAVL	/CHECK FOR THE END OF THE BUFFER.
	TAD (-IMQEND)
	SPA CLA
	JMP START	/STILL WITHIN THE BUFFER, EXIT.

	TAD (IMQUE-1)	/END OF BUFFER, RESET TOT START
	DCA IQAVL
	JMP START	/ALL DONE.

SMQWKA,	0		/LOCAL TEMP
/
/
/%R	LOAD AND FIRE THE SAMPLE MARKER
/
/%TW	GET 6 CHARACTER GROUP FOR LOADING TUBES IN LATENT
/	IMAGE MARKING SYSTEM.	LOAD TUBES, RELEASE 6 WORDS 
/	BUFFER STORAGE TO AVAILABLE AREA. ASSUMES DR8, REG-
/	ISTER 52.
/
/
START2,  CLB
	CAL
	SUSPND		/GO TO SLEEP 'TIL NEEDED

	CLB
	CDF 10
	TAD I (SMRLOC)	/GET THE WORD FROM THE DEFECT MEM
	TAD I (MEMPTR)	/TABLE AT THE SAMPLE MARKER POSITION
	AND (0377)
	TAD (MEMTBL)
	DCA SMRKA
	TAD I SMRKA	/IS THE SAMPLE MARKER SET TO FIRE
	CDF CUR
	AND (0400)	/FOR THIS SHEET ?
	SNA CLA
	JMP START2	/NO, BACK TO SLEEP

	CLA CMA		/MASK OF ALL BITS
	DBCO52		/CLEAR DR8 (?)
	CLB
	TAD IQNEXT	/NEXT STRING
	CIA		/2'S COMPLEMENT
	TAD IQAVL	/IF ZERO, CAUGHT UP
	SNA CLA
	JMP START2	/NO WORK. SHOULD WE BE HERE?

	TAD IQNEXT	/START OF STRING
	DCA XR14
	TAD (TUBADR-1)	/BIT ADDRESS OF TUBE IN REGISTER
	DCA XR15
	TAD (-6)	/6 CHARACTERS TO DISPLAY
	DCA IMQCNT	/CHARACTER COUNTER
IMLOOP,	TAD I XR14
	AND (0017)	/ONLY LOW ORDER CHARACTER
	DBSO52		/SEND DATA
	TAD I XR15	/TUBE ADDRESS
	DBSO52		/TICKLE THAT TUBE
	AND (7760)	/AND OFF DATA
	AND (7760)	/JUST FOR TIMING
	DBCO52		/CLEAR TUBE LOCATION
	TAD (17)	/CLEAR DATA BITS
	DBCO52		/CLEAR
	CLB
	ISZ IMQCNT	/DONE YET?
	JMP IMLOOP	/NO.	MORE TO LOAD.
/
	TAD (-IMQEND)	/SEE IF OVERFLOW
	TAD XR14	/RESET?
	SPA CLA		/SKIP IF SO
	JMP  .+3	/NO. ALL DONE.
	TAD (IMQUE-1)	/BACK TO BEGINNING
	SKP
	TAD XR14
	DCA IQNEXT	/WRAP-AROUND TABLE

	IOF		/NEEDED THE BOX TO OURSELVES !!
	CLA STL RAR 	/BIT 0
	DBSO52		/STROBE MARKER
	CLB
	TAD TUBWAT	/NO. OF 5 MIC. INTERVALS TO WAIT
	DCA TUBCNT	/LOCAL COUNTER
TUBLUP,	NOP		/1.2 MICROSECONDS
	ISZ TUBCNT	/2.6 MICROSECONDS
	JMP TUBLUP	/1.2 MICROSECONDS
	CLA CMA		/ALL BITS SET
	DBCO52		/CLEAR IT ALL
	ION
	JMP START2	/RETURN
/
/	TUBE REGISTER BIT ASSIGNMENTS
/
TUBADR,	100			/TUBE 1 BIT IN DR8-52
	40			/TUBE 2
	20			/TUBE 3
	1000			/TUBE 4
	400			/TUBE 5
	200			/TUBE 6
/
TUBWAT,	-4		/4 DECIMAL * 5 MICROSECONDS WAIT
TUBCNT,	0		/THE COUNTER ITSELF
/
IMQCNT,	0
SMRKA,  0		/LOCAL TEMPORARY
/
IMQIPR=IQAVL
/

	PAGE


	NOPUNCH		/F3COMM FILE FOLLOWS
	XLIST 1