/
/ VERSION 5A 4-26-77 MH
/
/THE FOLLOWING IS A SET OF 8 MODE (RALF TYPE)
/ROUTINES THAT ENABLE PDP 12(8) HARDWARE OPTIONS
/THESE ROUTINES ARE CALLABLE AT THE FORTRAN LEVEL
/THE FOLLOWING OPTIONS ARE SUPPORTED:
/
/	1 READ A BIT IN THE RIGHT SWITCHES
/	2 READ A BIT IN THE LEFT SWITCHES
/	3 READ A SENSE SWITCH
/	4 READ AN EXTERNAL LEVEL
/	5 OPEN OR CLOSE A RELAY
/
/IF THE REQUESTED BIT OR SWITCH IS SET THE
/SUBROUTINE RETURNS WITH THE CALLERS ARG SET TO
/A 1,OTHERWISE IT IS SET TO A 0
/
/
	SECT8 RSW
	INDEX P17
	BASE 0
	JSA SETUP	/CHECK ONE RSW BIT
	TRAP4 DORITE	/CALL 8 MODE ROUT USER
			/ARG IS IN FPP XR3
CONT,	STARTD		/ANSWER IS IN XR3
	FLDA% 0,XR2	/GET PTR TO CALLER ANS
	FSTA 3
	STARTF
	XTA XR3
	FSTA% 3		/GIVE ANS TO CALLER
GOBAK,	FLDA 30		/RTN TO CALLER
	JAC
	ENTRY LSW
LSW,	JSA SETUP	/READ 1 LSW BIT
	TRAP4 DOLEFT	/CALL 8MODE ROUT
	JA CONT
	ENTRY SSW
SSW,	STARTD		/READ A SENSE SWITCH
	FLDA ANSNSI
	JA ESSW
	ENTRY ROPEN
ROPEN,	STARTD		/OPEN A RELAY
	FLDA ABCLI
ERCLOS,	FSTA MASK	/PLANT A BCLI OR BSEI IN
			/8 MODE ROUTINE
	JSA SETUP
	TRAP4 RELAY
	FLDA 30
	JAC
	ENTRY EXTLVL
EXTLVL,	STARTD		/READ AN EXTERNAL LEVEL
	FLDA ANSXL
ESSW,	FSTA LSKP	/PLANT SXLI OR SNS IN
	JSA SETUP	/8 MODE ROUTINE
	TRAP4 DOSXL
	JA CONT
	ENTRY RCLOSE
RCLOSE,	STARTD		/CLOSE A RELAY
	FLDA ABSEI
	JA ERCLOS
SETUP,	0;0		/GET ARGS AND SETUP RTN
	STARTD
	SETX P17
	FLDA% 0,XR1	/GET PTR TO 1ST USER ARG
	FSTA 3
	STARTF
	FLDA% 3		/USER ARG TO FAC
	ATX XR3		/PUT IN XR FOR 8 MODE
	JA SETUP
DORITE,	0		/READ RIGHT SWITCHES
	LAS
	DCA MASK
	JMS SETBIT	/GET REQUESTED BIT
	AND MASK	/MASK RSW
	SZA CLA		/IF BIT IS SET,SET XR3=1
	ISZ XR3
	CIF CDF		/RTN TO RTS
	JMP% DORITE
DOLEFT,	0		/READ LEFT SWITCHES
	TAD DOLEFT
	DCA DORITE
	IOF
	6141		/LINC
	517		/LSW
	2		/PDP
	ION
	JMP DORITE+2
DOSXL,	0		/READ SENSE SWITCH
			/OR EXTERNAL LEVEL
	TAD XR3		/=SSW OR LVL TO DO
	AND P17
	TAD LSKP
	DCA LSKP
	CLL CML		/SET LNK=COND MET
	IOF
	6141
LSKP,	0		/=SNS I N OR SXL N
	261		/IF SKP FAILS THEN COND
			/IS MET SO ROTATE LNK
			/INTO AC(11) (261=ROL I 1)
	2		/PDP
	ION
	DCA XR3		/SAVE ANSWER
	CIF CDF
	JMP% DOSXL	/RTN TO RTS
RELAY,	0		/OPEN A RELAY
	TAD CONT	/=6
	JMS SETBIT	/GO SET RELAY BIT
	DCA MASK+1
	IOF
	6141
	15		/GET RELAYS
MASK,	0		/BCL I OR BSE I
	0		/SET OR CLR 1 RELAY BIT
	14		/ATR PUT RELAYS BACK
	2
	ION
	CLA
	CIF CDF
	JMP% RELAY
SETBIT,	0		/COME HERE TO POSITION
	TAD XR3		/BIT IN AC ACCORDING TO
			/C(AC)+XR3
	CMA CLL CML	/ROTATE BIT INTO POSITION
	DCA XR3		/XR3 MUST=0 UPON EXIT
	RAR		/ROTATE LINK UNTIL
	ISZ XR3		/XR3=0
	JMP .-2
	JMP% SETBIT	/RTN WITH AC SET
ABCLI,	1560		/BCL I
ABSEI,	1620		/BSE I
P17,	17		/FPP XR0
XR1,	1
XR2,	2
XR3,	0
ANSXL,	400		/SXL
	261		/ROL I 1
ANSNSI,	460		/SNS I
	261